QINGDAO QINLONG INDUSTRIES,INC.

SCREW PIN ANCHOR SHACKLE G-209	SIZE/INCH	PIN/INCH	WLL/TON	WT/KGS
	3/16	1/4	0.30	0.023
	1/4	5/16	0.50	0.054
	5/16	3/8	0.75	0.086
	3/8	7/16	1.00	0.141
	7/16	1/2	1.50	0.172
	1/2	5/8	2.00	0.286
	5/8	3/4	3.25	0.626
	3/4	7/8	4.75	1.021
	7/8	1	6.50	1.533
	1	1-1/8	8.50	2.413
	1-1/8	1-1/4	9.50	3.089
	1-1/4	1-3/8	12.00	4.309
	1-3/8	1-1/2	13.50	6.010
	1-1/2	1-5/8	17.00	7.801
	1-3/4	2	25.00	13.78
	2	2-1/4	35.00	20.41
	2-1/2	2-3/4	55.00	38.90

BOLT TYPE ANCHOR SHACKLE G-2130	SIZE/INCH	PIN/INCH	WLL/TON	WT/KGS
	1/2	5/8	2.00	0.358
	5/8	3/4	3.25	0.762
	3/4	7/8	4.75	1.234
	7/8	1	6.50	1.792
	1	1-1/8	8.50	2.776
	1-1/8	1-1/4	9.50	3.751
	1-1/4	1-3/8	12.00	5.312
	1-3/8	1-1/2	13.50	7.181
	1-1/2	1-5/8	17.00	9.435
	1-3/4	2	25.00	15.38
	2	2-1/4	35.00	23.70
	2-1/2	2-3/4	55.00	44.57
	3	3-1/4	85.00	69.85
	3-1/2	3-3/4	120.00	120.00
	4	4-1/4	150.00	153.50

SCREW PIN CHAIN SHACKLE G-210	SIZE/INCH	PIN/INCH	WLL/TON	WT/KGS
	3/16	1/4	0.30	0.022
	1/4	5/16	0.50	0.050
	5/16	3/8	0.75	0.077
	3/8	7/16	1.00	0.109
	7/16	1/2	1.50	0.181
	1/2	5/8	2.00	0.268
	5/8	3/4	3.25	0.549
	3/4	7/8	4.75	1.020
	7/8	1	6.50	1.433
	1	1-1/8	8.50	2.155
	1-1/8	1-1/4	9.50	3.062
	1-1/4	1-3/8	12.00	4.110
	1-3/8	1-1/2	13.50	5.275
	1-1/2	1-5/8	17.00	7.235
	1-3/4	2	25.00	12.14
	2	2-1/4	35.00	19.19
	2-1/2	2-3/4	55.00	32.55

BOLT TYPE CHAIN SHACKLE G-2150	SIZE/INCH	PIN/INCH	WLL/TON	WT/KGS
	1/2	5/8	2.00	0.340
	5/8	3/4	3.25	0.667
	3/4	7/8	4.75	1.143
	7/8	1	6.50	1.746
	1	1-1/8	8.50	2.517
	1-1/8	1-1/4	9.50	3.447
	1-1/4	1-3/8	12.00	4.903
	1-3/8	1-1/2	13.50	6.237
	1-1/2	1-5/8	17.00	8.392
	1-3/4	2	25.00	14.24
	2	2-1/4	35.00	21.21
	2-1/2	2-3/4	55.00	38.56
	3	3-1/4	85.00	56.35
	3-1/2	3-3/4	120.00	110.00
	4	4-1/4	150.00	138.50

U.S. Type Drop Forged Shackles to Federal Specification RR-C-271D
Min. Breaking Strength = 6 x WLL,
Finish: Hot Dipped Galvanized, Galvanized or Self Colored
5 times safety factor or 4 times safety factor shackles are available upon request.

Commercial Standard Wire Rope Thimble to Federal Specification FF-T-276b Type 2
Recommended for light duty serivce.
Available in Hop Dipped Galvanized or Zinc Plated.

STANDARD WIRE ROPE THIMBLE

NORMINAL SIZE	OVERALL LENGTH	OVERAL WIDTH	INSIDE LENGTH	INSDIE WIDTH	WT/100PCS
INCH	INCH	INCH	INCH	INCH	LBS
1/8	1-15/16	1-1/16	1-15/16	1-1/16	3.3
3/16	1-15/16	1-1/16	1-15/16	1-1/16	3.3
1/4	1-15/16	1-1/16	1-1/16	1-1/16	3.3
5/16	2-1/8	1-1/4	1-1/2	1-3/16	4
3/8	2-3/8	1-15/32	1-5/8	1-5/16	7.5
1/2	2-3/4	1-3/4	1-7/8	1-1/8	13.8
5/8	3-1/2	2-3/8	2-1/4	1-3/8	36
3/4	3-3/4	2-11/16	2-1/2	1-5/8	50
7/8	5	3-3/16	3-1/2	1-7/8	90
1	5-11/16	3-3/4	4-1/4	2-1/2	105
1-1/4	6-1/4	4-5/16	4-1/2	2-3/4	186
1-1/2	7-1/2	5-3/8	5	3-1/4	340
1-3/4	10-3/4	7-1/4	7-1/4	4-1/4	594
2	10-3/4	7-1/4	7-1/4	4-1/4	594

Extra Heavy Wire Rope Thimble to Federal Specification FF-T-276b Type 3
A rugged rope thimble recommended for heavy duty service.
Available in Hot Dipped Galvanized or Stainless Steel

EXTRA HEAVY WIRE ROPE THIMBLE

NORMINAL SIZE	OVERALL LENGTH	OVERAL WIDTH	INSIDE LENGTH	INSDIE WIDTH	WT/100PCS
INCH	INCH	INCH	INCH	INCH	LBS
1/4	2-3/16	1-1/2	1-5/8	7/8	7.5
5/16	2-1/2	1-11/16	1-7/8	1-1/16	14
3/8	2-7/8	2-1/8	2-1/8	1-1/8	25
7/16	3-1/4	2-3/8	2-3/8	1-1/4	36
1/2	3-5/8	2-3/4	2-3/4	1-1/2	51
9/16	3-5/8	2-11/16	2-3/4	1-1/2	51
5/8	4-1/4	3-1/3	3-1/4	1-3/4	75
3/4	5	3-13/16	3-3/4	2	147
7/8	5-1/2	4-1/4	4-1/4	2-1/4	185
1	6-1/8	4-15/16	4-1/2	2-1/2	300
1-1/4	7	5-7/8	5-1/8	2-7/8	414
1-3/8	9	6-13/16	6-1/2	3-1/2	834
1-1/2	9	7-1/8	6-1/4	3-1/2	1200
1-5/8	11-1/4	8-1/8	8	4	1625
1-3/4	12-3/16	8-1/2	9	4-1/2	1800
2	15-1/8	10-3/8	12	6	2600
2-1/4	17-1/8	11-7/8	14	7	4300

The following types are available upon request:

ORDINARY THIMBLES, BS-464
WIRE ROPE THIMBLE, DIN 6899
JIS STANDARD THIMBLES

APPLICATIONS: Thimbels are used for fibre rope, synthetic rope & steel wire rope.

MATERIAL: Mild Steel

FINISH: Hot Dipped Galvanized or Electro Galvanized, unless otherwise specified

CAUTIONS: The nominal size of the thimble is the diameter of the rope with which is is intended to be used. The dimensions of the thimble need to be such that the rope fits properly into the groove of the thimble. For ropes of intermediate sizes of the next larger size of thimble must be used. Check if the thimbles are free from roughness and sharp edges liable to injure the wire rope which may affect their strength and serviceability or that of the wire rope used therewith.

　

Turnbuckles to U.S. Federal Specification (FF-T-791b)

EYE & HOOK EYE & EYE EYE & JAW JAW & JAW

JIS Frame Type Turnbuckles

DIN 1480 Turnbuckles

Commercial Type Turnbuckles ( Malleable Iron )

Rigging Screws

Deck Lashing Turnbuckles

Long Frame Turnbuckles

Hamburg Turnbuckles

　

CONNECTING LINK G-80, EUROPEAN TYPE

CHAIN SIZE/MM WLL/TON N.W./KGS

5/6-8 1.00 0.095

6/7-8 1.20 0.14

7/8-8 2.00 0.20

10-8 3.20 0.38

13-8 5.40 0.76

16-8 8.20 1.10

18/20-8 12.50 1.80

22-8 15.25 3.20

26-8 21.25 4.50

32-8 32.50 9.00

CONNECTING LINK G-80, AMERICAN TYPE A-337

CHAIN SIZE/INCH WLL/LBS N.W./LBS

1/4" 4100 0.29

3/8" 7300 0.56

1/2" 13000 1.06

5/8" 20300 2.43

3/4" 29300 4.20

7/8" 39900 6.80

1" 52100 8.20

1-1/4" 81400 17.75

CONNECTING LINK G-80, AMERICAN TYPE A-336

CHAIN SIZE/INCH WLL/LBS N.W./LBS

1/4" 3250 0.25

3/8" 6600 0.60

1/2" 11250 1.25

5/8" 16500 2.30

3/4" 23000 4.00

7/8" 28750 5.75

1" 38750 8.00

1-1/4" 157500 15.00

GRADE 80 SAFETY EYE HOOK CLS TYPE

CHAIN SIZE/MM WLL/TON N.W./KGS

6-8 1.20 0.50

7/8-8 2.00 0.80

10-8 3.20 1.50

13-8 5.40 3.20

16-8 8.00 6.10

18/20-8 12.50 7.50

22-8 15.00 13.40

MIN. BREAKING STRENGTH = 4 X WLL

GRADE 80 SAFETY SWIVEL HOOK CLW TYPE

CHAIN SIZE/MM WLL/TON N.W./KGS

6-8 1.20 0.71

7/8-8 2.00 1.30

10-8 3.20 2.20

13-8 5.40 4.50

16-8 8.00 8.20

18/20-8 12.50 11.70

MIN. BREAKING STRENGTH = 4 X WLL

GRADE 80 SAFETY CLEVIS HOOK CLG TYPE

CHAIN SIZE/MM WLL/TON N.W./KGS

6-8 1.20 0.45

7/8-8 2.00 0.85

10-8 3.20 1.45

13-8 5.40 2.90

16-8 8.00 5.60

18/20-8 12.50 12.60

MIN. BREAKING STRENGTH = 4 X WLL

　

GRADE 80 EYE GRAB HOOK

CHAIN SIZE/MM WLL/TON N.W./KGS

6-8 1.50 0.135

7/8-8 2.00 0.230

10-8 3.20 0.725

13-8 5.40 1.34

16-8 8.00 2.10

20-8 12.50 3.88

GRADE 80 CLEVIS GRAB HOOK

CHAIN SIZE/MM WLL/TON N.W./KGS

6-8 1.20 0.175

7/8-8 2.00 0.35

10-8 3.20 0.72

13-8 5.40 1.33

16-8 8.00 2.65

20-8 12.50 3.88

　

GRADE 80 CLEVIS SLING HOOK WITH LATCH

CHAIN SIZE/MM WLL/TON N.W./KGS

7/8-8 2.00 0.55

10-8 3.20 1.21

13-8 5.40 2.90

GRADE 80 EYE SLING HOOK WITH LATCH

CHAIN SIZE/MM WLL/TON N.W./KGS

7/8-8 2.00 0.50

10-8 3.20 1.04

13-8 5.40 1.91

GRADE 80 CLEVIS HOOK TYPE C

CHAIN SIZE/MM WLL/TON N.W./KGS

7/8-8 2.00 0.40

10-8 3.20 0.85

13-8 5.40 1.75

GRADE 80 CHOCK HOOK

CHAIN SIZE/MM WLL/TON N.W./KGS

7/8-8 2.00 0.21

10-8 3.20 0.39

GRADE 80 U-CONNECTOR

CHAIN SIZE/MM WLL/TON N.W./KGS

6 1.10 0.11

7 2.00 0.14

10 3.20 0.30

13 5.40 0.70